Properties Unlimited Group completed an epoxy flooring project for the internal area of a 16 × 8 m barn shed and an adjoining 4 m patio in Atkinson Dam. The concrete surfaces were prepared to receive a durable coating suited to workshop and outdoor use.
Work began with diamond grinding and dust extraction to open the concrete pores, followed by repairs to any cracks or surface imperfections using fast-acting Ardit compound. After vacuuming, a bonding primer was applied, then a 100% solids epoxy base coat in light grey. Premium acrylic flakes in Black Marble Large were broadcast to full rejection across both the shed floor and patio. Excess flake was removed once set, and a clear gloss polyaspartic topcoat sealed the system.
The finished floors are durable, slip-resistant and easy to clean, with a consistent speckled appearance and gloss finish. A 10-year warranty was issued on completion.
We diamond grind the concrete with dust extraction, opening the surface pores for maximum mechanical fuse. Any cracks or pitting are repaired with fast-acting Ardit compound and vacuumed clean.
A bonding primer is applied to the prepared slab. This seals the concrete and creates the adhesion layer that locks everything above it in place. It also prevents moisture vapour from pushing up through the system.
A high-density polymer epoxy base coat is applied in light grey. This high-solids formula eliminates voids in the concrete surface and provides the structural foundation of the floor.
Premium acrylic colour flakes are broadcast into the wet base coat for full rejection coverage. Excess flake is removed once set, leaving a tight, even finish with uniform impact resistance across the entire slab.
A clear polyurethane or polyaspartic topcoat seals the system. Non-porous, cross-linking polymers provide chemical isolation, UV stability, and the slip rating that makes the floor safe in wet conditions.
Talk to the Properties Unlimited Group team about epoxy flooring for your shed, garage, patio or outdoor living area.
